Home / i / Ic2kenum.sys

Ic2kenum.sys

File: Ic2kenum.sys
Platform: USB SmartCard Enumerator
Official: OEM Corporation
Size: 0KB
Path: C:\Windows\system32\DRIVERS\
Version: N/A

Description:

ic2k Bus Enumerator

工行U盾无法识别,U盾无法检测、U盾驱动安装不成功等问题是否困扰着您呢?

不管是新装系统还是老系统,不管是XP还是 Windows2003,插入U盾,指示灯亮,提示发现新硬件,不过发现的是USB chip device,在智能卡管理中找不到插入的U盾,服务Smart Card也已经开启,工行插件全部都已安装,U盾驱动也安装好了但是系统就是无法使用U盾。

这个问题一般来说根本不是工行工作人员说的什 么系统问题,系统一般在sp2,explorer 6.0以上就行。根本的原因是:工行的U盾驱动程序没有装上。你可以验证一下,点“我的电脑”右键,“属性”,“硬件”,“设备管理器”,U盾硬件项目会 出现黄色的感叹符,表示驱动不正常。还有可能要出现“智能卡阅读器”(smartcardreader)不正常,如果是这样,说明驱动没有装上。
为什么会装不上呢?以工行捷德U盾为例,从网上下载一个U盾的驱动并安装后,一方面它把证书工具软件安上了,同时会把驱动程序解压到c:\windows \temp\starkey100_icbc这个文件夹,当插上U盾后,会自动搜索驱动程序并安装,但系统怎么也不会去搜索temp这个临时文件夹,所以 安装不了。
解决办法:在上面所说的设备管理器中,右键点黄色感叹号所在设备行,点更新驱动程序,然后手工指向c:\windows\temp\starkey100_icbc这个文件夹,点确定即可安装完毕。

Click to download Ic2kenum.sys Fix Tool

If Ic2kenum.sys is missing in one or both directories, program or game that uses this file cannot find it and cannot receive required data, so you get error like that:

The program can't start because Ic2kenum.sys is missing from your computer. Try reinstalling the program to fix this problem.

Ic2kenum.sys Not Found

Of course, you don't need to reinstall game or program. You just need to download Ic2kenum.sys and install it properly to fix this error.

Learn how to Fix Ic2kenum.sys file Errors

Method 1: Solving the DLL Error by Copying the Ic2kenum.sys File to the Windows System Folder

    Download the Ic2kenum.sys error Repair Tool.
    Click "Save File" and follow the on-screen instructions to install the program.
    First, open DLLEscort, click on the "File Repair" to the right of the input "file name" and click "download"


    After the download is complete, find the corresponding version of the file, click on "Open"


    Step 2:Copy it to the corresponding directory Or Copying the Ic2kenum.sys file into the Windows/System32 folder
  1. If you are using a 64 Bit operating system, copy the "Ic2kenum.sys" file and paste it into the "C:\Windows\sysWOW64" as well.
    NOTE! On Windows operating systems with 64 Bit architecture, the dll file must be in both the "sysWOW64" folder as well as the "System32" folder. In other words, you must copy the "Ic2kenum.sys" file into both folders.
    Pasting the Ic2kenum.sys file into the Windows/sysWOW64 folder
    Step 3:Pasting the Ic2kenum.sys file into the Windows/sysWOW64 folder
  2. Next, You need to do a full System Scan




  3. In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.
    NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.
    1. Open the Start Menu and before clicking anywhere, type "cmd" on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in "cmd" to bring up the Command Prompt.
    2. Right-click the "Command Prompt" search result that comes up and click the Run as administrator" option.
    Running the Command Prompt as administrator
    Step 4:Running the Command Prompt as administrator
  4. Paste the command below into the Command Line that will open up and hit Enter. This command will delete the damaged registry of the Ic2kenum.sys file (It will not delete the file we pasted into the System32 folder; it will delete the registry in Regedit. The file we pasted into the System32 folder will not be damaged).
    %windir%\System32\regsvr32.exe /u Ic2kenum.sys
    Deleting the damaged registry of the Ic2kenum.sys
    Step 5:Deleting the damaged registry of the Ic2kenum.sys
  5. If you have a 64 Bit operating system, after running the command above, you must run the command below. This command will clean the Ic2kenum.sys file's damaged registry in 64 Bit as well (The cleaning process will be in the registries in the Registry Editor< only. In other words, the dll file you paste into the SysWoW64 folder will stay as it).
    %windir%\SysWoW64\regsvr32.exe /u Ic2kenum.sys
    Uninstalling the Ic2kenum.sys file's broken registry from the Registry Editor <em>(for 64 Bit)</em>
    Step 6:Uninstalling the Ic2kenum.sys file's broken registry from the Registry Editor (for 64 Bit)
  6. We need to make a new registry for the dll file in place of the one we deleted from the Windows Registry Editor. In order to do this process, copy the command below and after pasting it in the Command Line, press Enter.
    %windir%\System32\regsvr32.exe /i Ic2kenum.sys
    Creating a new registry for the Ic2kenum.sys file in the Windows Registry Editor
    Step 7:Creating a new registry for the Ic2kenum.sys file in the Windows Registry Editor
  7. Windows 64 Bit users must run the command below after running the previous command. With this command, we will create a clean and good registry for the Ic2kenum.sys file we deleted.
    %windir%\SysWoW64\regsvr32.exe /i Ic2kenum.sys
    Creating a clean and good registry for the Ic2kenum.sys file <em>(64 Bit için)</em>
    Step 8:Creating a clean and good registry for the Ic2kenum.sys file (64 Bit için)
  8. You may see certain error messages when running the commands from the command line. These errors will not prevent the installation of the Ic2kenum.sys file. In other words, the installation will finish, but it may give some errors because of certain incompatibilities. After restarting your computer, to see if the installation was successful or not, try running the software that was giving the dll error again. If you continue to get the errors when running the software after the installation, you can try the 2nd Method as an alternative.

Method 2: Copying the Ic2kenum.sys File to the Software File Folder

  1. In order to install the dll file, you need to find the file folder for the software that was giving you errors such as "Ic2kenum.sys is missing", "Ic2kenum.sys not found" or similar error messages. In order to do that, Right-click the software's shortcut and click the Properties item in the right-click menu that appears.
    Opening the software shortcut properties window
    Step 1:Opening the software shortcut properties window
  2. Click on the Open File Location button that is found in the Properties window that opens up and choose the folder where the application is installed.
    Opening the file folder of the software
    Step 2:Opening the file folder of the software
  3. Copy the Ic2kenum.sys file into this folder that opens.
    Copying the Ic2kenum.sys file into the software's file folder
    Step 3:Copying the Ic2kenum.sys file into the software's file folder
  4. This is all there is to the process. Now, try to run the software again. If the problem still is not solved, you can try the 3rd Method.

Method 4: Solving the Ic2kenum.sys Error Using the Windows System File Checker

  1. In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.
    NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.
    1. Open the Start Menu and before clicking anywhere, type "cmd" on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in "cmd" to bring up the Command Prompt.
    2. Right-click the "Command Prompt" search result that comes up and click the Run as administrator" option.
    Running the Command Prompt as administrator
    Step 1:Running the Command Prompt as administrator
  2. Type the command below into the Command Line page that comes up and run it by pressing Enter on your keyboard.
    sfc /scannow
    Getting rid of Windows Dll errors by running the sfc /scannow command
    Step 2:Getting rid of Windows Dll errors by running the sfc /scannow command
  3. The process can take some time depending on your computer and the condition of the errors in the system. Before the process is finished, don't close the command line! When the process is finished, try restarting the software that you are experiencing the errors in after closing the command line.

Why your computer get this error?

Missing, corrupt or incompatible Ic2kenum.sys
Undesirable damage on crucial system files
Incorrect uninstall of third- party program
Driver update failure
Unneeded registry components
Disable or invalid drivers
Obscure registry errors

How Do I Know if I'm Running 32-bit or 64-bit Windows?

To check what version you're using on Windows 10 or Windows 8, just open up the old Control Panel and browse down to System and Security -> System (you can also search for System and find it that way).

You'll immediately see what version you're using, whether 64-bit or 32-bit.

win10

Checking on Windows 7 or Vista

If you're using Windows 7 or Windows Vista, all you have to do is pop open your start menu, right-click on the Computer item, and then choose Properties.

Now you'll see the System information screen—which you might note that you can also get to from Control Panel if you prefer—and down in the system section you'll see “System type”, which will say 32-bit Operating System or 64-bit Operating System depending on which version you have installed.

win7